TPR Series-Thermoplastic Rubber Wheels

Capacity: 125 - 500 LBS

Grey thermoplastic rubber molded to a polyolefin core. Resists most chemicals, rolls easily and quietly

Read more...

Characteristics:

1. • Temperature range -45º to +180º F
   

2. • Durometer 80 (+/-5) Shore A
   

3. • Grey tread/Grey hub
   

Options:

1. • For thrust washers use suffix “TW”
   

2. • Precision bearings
   

3. • For thread guard use suffix “TG”
   

Characteristics:

1. • Temperature range -45º to +180º F
   

2. • Durometer 75 (+/-5) Shore D
   

3. • Zerk grease fitting for 2” tread/5” diameter and above
   

Options:

1. • Red Tread/Grey Hub
   

2. • Black Tread/Grey Hub
   

3. • Orange tread/Black Hub
   

Characteristics:

1. • Temperature range -40º to +200º F
   

2. • Durometer 95 (+/-5) Shore A
   

3. • Zerk grease fitting in hub for 4” diameter and above
   

Options:

1. • Other Colors
   

2. • Additional Sizes
   

3. • Tapered Roller Bearing
   

Characteristics:

1. • Temperature range -45º to +250º F
   

2. • Durometer 100 Shore D
   

Options:

1. • Phenolic Laminate (PL) - 40% more impact resistance than (PH)
   

2. • High Temperature Phenolic (PT) - Operating Temperature, +475º F continuous and up to +525º F intermittently
   

Characteristics:

1. • Temperature range -45º to +180º F
   

2. • Durometer 65 (+/-5) Shore D
   

3. • Resists abrasion
   

4. • Good chemical resistance
   

Options:

1. •Heavy Duty Polyolefin (POH) - for high impact resistance
   

2. • High Temp Polyolefin (POT) - for high temperature application; to 550º F
   

Characteristics:

1. • Temperature range -40º to +200º F
   

2. • Durometer 95 (+/-) Shore A
   

3. • Resists abrasion
   

4. • Good chemical resistance
   

Options:

1. • Other colors available
   

2. • Additional sizes
   

3. • Tapered Roller Bearings
   

1.                          Wheel Types
   

2. 
   

TPR Series-Thermoplastic Rubber Wheels

Capacity: 125 - 500 LBS

Grey thermoplastic rubber molded to a polyolefin core. Resists most chemicals, rolls easily and quietly

Read more...

PP Series- Polyurethane Mold on Polypropylene Hub

Capacity: 250-1200 LBS

A lightweight wheel that has a polyurethane tread molded on a polypropylene core. This wheel is highly corrosion resistant

Read more...

PS Series- Polyurethane Mold on Semi Steel Hub

Capacity: 550 - 4800 LBS

High capacity wheel having a polyurethane tread chemically bonded to a semi steel core allowing maximum non-marking floor protection. They are resistant to most chemicals and abrasion.

Read more...

PH Series- Phenolic

Capacity: 550 - 8000 LBS

This high-capacity, non-marking wheel is molded with macerated canvas and impregnation with high quality phenolic resin.

Read more...

PO Series- Polyolefin

Capacity: 150-1000 LBS

These economical, light weight wheels are injection molded and have good impact strength. Good resistance to chemicals and absorption

Read more...

PA Series- Polyurethane Mold on Aluminum Hub

Capacity: 600 - 1500 LBS

Polyurethane molded to a solid aluminum core. Chemical resistant and high capacity, Resists chunking, cutting and abrasion.

Read more...